This section explains how to set up a Buffalo router to use a static global IP address.
Please refer to it when checking or resetting the settings if your connection suddenly becomes unusable. Step-Guide| 情報 |
|---|
The configuration screen image is from the WSR-1500AX2S model. |
Before turning on the router, ensure that the switch on the side is set to "ROUTER."
If there is also an AUTO/MANUAL toggle switch, make sure it is set to "MANUAL."
 | 情報 |
|---|
Immediately after purchase, the switch is set to ROUTER mode. |
- Connect the LAN port on your router to the LAN port on your computer using a LAN cable.
- Turn on your router.
- Open a browser on your computer and go to http://192.168.11.1/.
- When the login screen appears, log in with the credentials provided on the setup card (or use the updated credentials if you have changed them).
 - Click on "Advanced Settings."
 - Navigate to "Internet" in the left menu.
 - When the submenu expands, select "Internet."
 - Change the IP address acquisition method to manual settings.
 - Enter the desired global IP address (starting with 133.16) for the router's IP address.
 - Set the default gateway IP address with the fourth digit as '1'.
 - Configure the primary DNS server address as 133.16.28.44 and the secondary DNS server address as 133.16.28.45.
 - Click the "Apply" button.
 - Wait for the screen to switch to the settings screen.
 - Once the screen changes, the configuration is complete.
関連記事| ラベル別コンテンツ |
|---|
| showLabels | false |
|---|
| max | 5 |
|---|
| spaces | CISSUPINT |
|---|
| showSpace | false |
|---|
| sort | modified |
|---|
| reverse | true |
|---|
| type | page |
|---|
| cql | label in ("ネットワーク","ルータ","buffalo","固定グローバルipアドレス接続") and type = "page" and space = currentSpace() |
|---|
| labels | 固定グローバルipアドレス接続 ネットワーク buffalo ルータ |
|---|
|
|